White mineral fibre acoustic panel with fine fissured surface. These panels have a class 1 fire rating, that subject to building codes for particular areas they are used, makes them suitable for most locations, but have a high insulation facture that will deter heat loss in heat rooms.

The white faced galvanised steel interlocking frame is fast and easy to install. A Wall angle section is fitted around the walls, then the main "T" section rests on these and reach acroos the room. For wide areas, the main "T" has interlocking end connectors to readily make up long sections. The 0.6M & 1.2M spacer "T" slot in to the main "T" to form a rigid interlocking grid, ready for the panels to drop in. For large areas the main "T" must be suspended by wire from above, especially when supporting the heavier Fissure Panels

Designed to interlock into the 1.2M cross "T" and the 3.6M main "T"'s. to form a grid pattern

Designed to interlock into the main "T"'s

The mains "T" is designed to run down the longest length and can be interlock to cover larger spans.

3M in length 90 degree galvanised with a white finish.

2mm in diameter ( 14 SWG ) this wire is strong enough for ceilings encompassing drop-in light units.

2mm in diameter ( 14 SWG ) this wire is strong enough for ceilings encompassing drop-in light units.