Polycarbonate Sheet Accessories & Fixings

Aluminium Adhesive Tape

Sold in 10M rolls and used for sealing the ends of your polycarbonate. Aluminium for the top ends (Highest Point). The size stated in the product description is the sheet these rolls will fit. The actual width of the tape is as follows.
6 & 10mm is 26mm wide approx
16mm is 38mm wide approx
25 & 32mm is 46mm wide approx
35mm is 50mm wide approx

Self Adhesive Vent Tape

Sold in 10M rolls and used for sealing the ends of your polycarbonate. Vent For Bottom Ends (Gutter End) The size stated in the product description is the sheet these rolls will fit. The actual width of the tape is as follows.
6 & 10mm is 26mm wide approx
16mm is 40mm wide approx
25 & 32mm is 47mm wide approx
35mm is 60mm wide approx

Sheet Endclosures or "U" Drips

Sheet Endclosure or "U" Drips as they are sometimes known are used to close the top & bottom ends of Polycarbonate sheet. These end closure are designed to be used in conjunction with the alumimium and vent tapes applied to the sheets prior to installation of the sheet end closure with there unique drip design they prevent water from being blown under the sheet into the eaves space on your roof

Sealing Buttons

Sealing Buttons are 45mm in diamter with a 16mm boss. Sealing buttons are used to give addition fixings to Polycarbonate sheets but can be used for other applications. Buttons should only be used down the center of the polycarbonates sheet. NEVER use buttons across the width as this will prevent the Polycarbonate from expanding. Each pack of sealing buttons contactain, 10 buttons and caps, 10 foam sealing washers and 10 screws.
For 6mm sheet use B6, For 10 & 16mm Use B16 & for 25 & 32mm use B25.

Best Selling Items

16oz White Rubber Mallet £2.93 A semi hard head that has been designed not to mark ... CLICK To Find Out More	Contract 700T White £1.87 Silicone 700T is a fast, neutral cure, low modulus sealant specially ... CLICK To Find Out More	External Corner £3.49 2.4M long, used for edging the panels around external corners, when ... CLICK To Find Out More

150mm x 5M Deeplas Cappit Board £9.39 Capping Boards are available in 2.5 & 5M lengths with widths ... CLICK To Find Out More	4M Glen Centre Bar White £14.01 The most economical glazing bars system available. These glazing bars are ... CLICK To Find Out More	2.1M x 10mm Sheet End Closure White £3.02 Sheet Endclosure or "U" Drips as they are sometimes known are ... CLICK To Find Out More

Peak System Eaves Filler £8.34 Are used to seal the polycarbonate sheets along the front edge ... CLICK To Find Out More	2.1M x 16mm Sheet End Closure White £3.76 Sheet Endclosure or "U" Drips as they are sometimes known are ... CLICK To Find Out More	3M Glen Centre Bar White £10.50 The most economical glazing bars system available. These glazing bars are ... CLICK To Find Out More

400ml Silicon Spray £2.34 This all purpose lubricant & mould release spray is designed to ... CLICK To Find Out More	Clear Premier Silicone £2.29 Premier 450 Silicon Sealant is specially recommended for polycarbonate sheets, this ... CLICK To Find Out More	300mm Deeplas Corner Cover £1.75 are used for joining the ends, finishing internal & external corners. ... CLICK To Find Out More

Shop For Polycarbonate uPVC Fascias Soffits Cladding Corrugated Roofing Sheets And Accessories | Polycarbonate Sheet - Multiwall | Polycarbonate Sheet Accessories & Fixings

C & A Supplies Ltd, Bidder Street, London E16 4ST

Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055

Or Send Us An Email using the contact us link
Site Designed By D.Beaumont
Kent Branch :- C & A Building Plastics, Gillingham BP, Kent ME8 0QN Enquires in KENT AREA ONLY Tel 01634 374444 Fax 01634 366644

New Products

Order Online or Call 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055