Speedfit Installation GuideTo help our customers we have included the manufacturers installtion guide. Each application is different and if you are unsure then contact a qualified tradesman for advice. Speed Fit Installation Guide |
 |
SpeedFit Plumbing Speedfit Push Fit Plastic Plumbing from the UKs leading manufacturer conforms to Building Code BS7291 (Parts 1 & 3) and is approved by the Water Regulation Authority for use on both Hot & Cold Water services, including sealed and open vented Central Heating Systems. Similar in design to Hepworth hep20 and Far easier to use than copper pipe and fittings. "The Add To Order Button Is At The Bottom Of The Page - Enter The Quantity Against The Items You Require, Scroll To The Bottom And Click On The Button" |
|
 |
15mm SpeedFitThe first part of this page contains mainly 15mm pipe and fittings, as you scroll down you will find the 22mm fittings.
|
 |
These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs. |
 |
These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs. |
 |
These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when the fitted into any of the coupleing featured |
 |
An inline straight connetor for joining 2 pieces of pipe. |
 |
A standard 90 degree bend, |
 |
A Standard Tee Piece for splitting the circuit |
 |
As the name suggests, an easy fitted blank cap |
 |
Designed to fit directly on to the base of your taps to allow simple connection. The connectors only require hand tightening when fitted. |
 |
|
 |
Stem elbows are used to ad a bend to an existing straight run without having to remove the present fixings |
 |
Exactly what it says. To allow barrier pipe to be connected to existing tanks. |
 |
These Brass Stop Valves are easily fitted |
 |
The simple inline service valves are ideal for isolating areas of the system to allow serviceing to be carried out on parts of the system |
 |
Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securly. Its as simple as that. |
 |
These spacers are designed to simply fir in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip. |
 |
These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections. |
 |
These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections. |
 |
These 300mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet. |
 |
These 500mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet. |
 |
A straight coupler with a 15mm push fit one end and a 22mm push fit the other end. |
 |
A 22mm push fit on one end and a 15mm pipe on the other. |
 |
SpeedFit Reducing Tees Ref: SFRT £1.99 (£2.34 Inc VAT) There are 4 Reducing Tees avaliable. please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22 |
 |
There are 4 Reducing Tees avaliable. please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22 |
 |
There are 4 Reducing Tees avaliable. please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22 |
 |
There are 4 Reducing Tees avaliable. please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22 |
 |
There are 4 Reducing Tees avaliable. please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22 |
 |
22mm SpeedFitThe first part of this page contains 22mm pipe and fittings |
 |
These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs. |
 |
These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs. |
 |
These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when the fitted into any of the coupleing featured |
 |
An inline straight connetor for joining 2 pieces of pipe. |
 |
A standard 90 degree bend, |
 |
A Standard Tee Piece for splitting the circuit |
 |
As the name suggests, an easy fitted blank cap |
 |
Stem elbows are used to ad a bend to an existing straight run without having to remove the present fixings |
 |
Exactly what it says. To allow barrier pipe to be connected to existing tanks. |
 |
Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securly. Its as simple as that. |
 |
These spacers are designed to simply fir in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip. |
 |
These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections. |
 |
These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections. |
 |
These 300mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet. |
 |
These 500mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet. |
 |
This mult-purpose manifold allows expansion to systems in one easy solution with 3 x 22mm and 4 x 15mm outlets. |
 |
Specialy Designed for cutting barrier pipe these cutters leave a clean edge to help avoid damage to seals when assembling the speed fit range. |
 |
Designed for connecting old imperial copper pipe to moden 15mm |
 |
Designed for connecting old imperial copper pipe to moden 22mm |
 |
Speedfit Installation Guide1To help our customers we have included the manufacturers installtion guide. Each application is different and if you are unsure then contact a qualified tradesman for advice. Speed Fit Installation Guide |
 |