 Glen 2 Frame supported Glazing BarsThe most economical glazing bars system available. These glazing bars are suitable for Conservatory Roofs, Carports, Gazebo's and other such installations. These glazing bars, with there all plastics construction yields a high degree of insulation with non-scratch solid colours in a choice of white or brown (non-scratch means the bars are the same colour through the core). Suitable for 6, 10 & 16mm polycarbonate sheets. For end bars use the same glazing bar and fit an edge bead featured.
Choose to add the end caps now by ticking the box and save time, if you prefer you can add these when you buy your other accessories |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Avon 2 Frame Supported Glazing Bars Glazing bars are designed for jointing 10 & 16mm thick polycarbonate on timber framed roofs, but are robust enough to self-support on spans up to 600mm. Designed by C&A and manufactured in England. Avon bars have a strong aluminium 58mm wide core, which is capped top & bottom by a brown or white uPVC cladding, the caps totally conceal the metalwork and give a good thermal insulation. For end bars use the same glazing bar and fit an edge bead featured.
Choose to add the end caps now by ticking the box and save time, if you prefer you can add these when you buy your other accessories |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 10mm Edge Beads10mm Edge Beads are used with Glen & Avon system glazing bars when using 6 & 10mm sheets. They are used to provide a finish to the first and last bar in roof. They have been specially designed to mimic a polycarbonate sheet so as to allow the correct loading when the top cap of the glazing bar is pushed home ensuring a uniform pressure on the polycarbonate sheets when fixed down. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16mm Edge Beads10mm Edge Beads are used with Glen & Avon system glazing bars when using 6 & 10mm sheets. They are used to provide a finish to the first and last bar in roof. They have been specially designed to mimic a polycarbonate sheet so as to allow the correct loading when the top cap of the glazing bar is pushed home ensuring a uniform pressure on the polycarbonate sheets when fixed down. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Important NoticeAll Plastic Building Materials should be kept flat during transport and storage. If the items are to be stacked then care must be taken not to overload the stack so as to crush the lower products, it it extremely important that all materials are covered with a LIGHT PROOF sheet to prevent direct sunlight over heating the interior of the stack.
|
|
External Corner | | Contract 700T White | | 4M Glen Centre Bar White |
|
150mm x 5M Deeplas Cappit Board | | 16oz White Rubber Mallet | | Peak System Eaves Filler |
|
2.1M x 10mm Sheet End Closure White | | 2.5M Square 65mm Down Pipe | | 300mm Deeplas Corner Cover |
|
4M Square Gutter | | 400ml Silicon Spray | | Gutter Square Stopend Outlet |
|
C & A Supplies Ltd, Bidder Street, London E16 4ST
Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055
Or Send Us An Email using the contact us link
Site Designed By D.Beaumont Kent Branch :- C & A Building Plastics, Gillingham BP, Kent ME8 0QN
Enquires in KENT AREA ONLY Tel 01634 374444 Fax 01634 366644
(SG100)
(CFCF)
(DM60)
(DV50)
(YT25B)
(STXB)
(R322O)
